Frequently Asked Questions
Discover your question from underneath or present your inquiry from the submit box.
The best option between an HRV and an ERV depends on the climate conditions, building regulations, and specific requirements of the project. If your house is too humid in winter (above 60% RH) then an HRV is the better choice, as it would surely get rid of excess humidity while an ERV would tend to keep it at a high level. If the opposite is true and your house is too dry in winter, then an ERV would be a better choice as it helps retain humidity, eliminating the need (and cost) for you to generate it through other means.
So, in the end, there is no right choice between ERV & HRV systems but keep an eye on quality. If you are building or renovating a properly airtight house, especially if going for Passive House, nZEB, or LEED certification, HRV or ERV will help you achieve a high-performance building.
Consult LUNOS decentralised ventilation systems: https://www.www.partel.co.uk/products/lunos-ventilation-with-heat-recovery
U-value is the term used to describe the heat transfer coefficient of a building element (for example of a wall, roof or floor). The U-value describes the insulation quality of a building. The unit of the U-value is W/(m²K). The lower a U-value, the better the insulation quality of the building element. A building element’s U-value is extremely important as there are certain standards that should be reached according to Building Standards.
In energy-efficient buildings, ventilation systems are essential for good health, as they ensure appropriate amounts of clean, fresh air while hampering moisture build-up and mould growth. Ventilation systems should thus be installed in every new build and energy retrofit. The reduced levels of indoor air pollution are reason enough to invest in a good ventilation system. In most climates, ensuring that the system comes with highly efficient heat recovery means that some of these investment costs can be regained in the form of energy savings throughout the building lifecycle.
Further information: https://www.www.partel.co.uk/basics-home-ventilation
Airtightness is the resistance of the building envelope to inward or outward air leakage. Air leakage is driven by differential pressures across the building envelope. Excessive air leakage results in increased energy consumption and can create a draughty, unhealthy, cold/hot uncomfortable building. The mechanisms that create these differences in pressure are combined effects of rising internal warm air, external wind and mechanical ventilation systems.
The correct level of airtightness does not have to be difficult to achieve but it is important to choose the right solution that can ensure the building fabric performance. Airtightness and wind tightness are the mechanisms for ensuring that air leakage is kept within the Building Regulation standards. Further information: https://www.www.partel.co.uk/building-physics
Passive House buildings combine unparalleled comfort with very low energy consumption. Quality design, careful planning, high-performance materials & execution are essential in delivering you:
1. Exceptionally high levels of insulation
2. Well-insulated window frames and glazings
3. Thermal bridge free design and construction
4. An airtight building envelope
5. Ventilation with highly efficient heat or energy recovery
It’s never too late to reduce energy consumption, and invest in added value by building smart and efficient.
A large part of the energy consumption is caused by badly insulated buildings. The U-Value KIT provided by Partel enables you to precisely measure the heat loss of buildings.
Our measurement-approach uses heat flux meters (HFM) and temperature sensors to achieve a certified U-value over 72 hours. The U-value Kit allows direct measurement of the thermal insulation quality of buildings and their elements. The system can be used to measure energy efficiency as well as to design and test new insulation products in accordance with ISO 9869. The system has the potential for use in a number of areas, including academic research, post-completion analysis of buildings to ensure insulation has been installed correctly, building physics analysis, and in the testing of new wall constructions by manufacturers, thus helping to eliminate the performance gap.
Smart, Real-time U-Value Measurement: https://www.www.partel.co.uk/smart-u-value-measurement
Energy can pass through the construction elements (like walls, roofs, ceilings, and also corners, connections, and penetrations) in the building much more easily than throughout the rest of the building envelope, a phenomenon known as thermal bridging. Thermal bridging must be reduced as much as possible in order to eliminate cold areas that could lead to moisture damage. Preventing thermal bridges is one of the most efficient energy savings measures there is. Partel’s products are developed especially for this purpose: https://www.www.partel.co.uk/products/thermal-bridging
The air infiltration through gaps and joints in a conventional building is perceived as draughts. Such “ventilation” is unreliable and uncomfortable. It is also insufficient to ensure healthy indoor air quality on its own, thus necessitating the opening of windows regularly and for extended periods of time. An airtight building envelope ensures that the ventilation system works as efficiently as possible. Perhaps more importantly, it is also key to preventing moisture damage and mould growth: in conventional buildings, gaps in the building structure allow air to pass through and thereby cool down. This can result in condensation that can put the building at risk. Due to the high level of airtightness, this is not a concern in Passive House buildings or nearly zero energy buildings (nZEB)!
See our trusted solutions: https://www.www.partel.co.uk/partel-products
- High levels of comfort
- Consistent fresh air all throughout the building
- Structural longevity: mould free buildings with a highly reduced risk of moisture damage
- Extremely low heating and cooling costs, despite rising energy prices
- A radically improved indoor environment
Let the projects convince you!: https://www.www.partel.co.uk/sustainable-projects
In Passive House buildings, it’s not necessary to worry about airing out rooms on a regular basis – controlled ventilation with heat recovery constantly provides fresh air at comfortable temperatures so that everyone’s needs can be met. Opening windows to achieve this would typically result in heat losses greater than the total energy demand of a Passive House building. Further information: https://bit.ly/2Vazs1z